SPEC Direct Master Warehouse Distributor - All SPEC Products Available. SPEC Stage 2 clutch kit which can hold 567 lbft. These clutches are great for all mild to moderately modified naturally aspirated and power adder engines, but also good for stock power levels and spirited driving when good daily drivability and extremely long life are the goal. With the Kevlar disc, these clutches are much stronger than a stock clutch, and virtually as smooth when shifting with stock-like daily drivability and EXCELLENT wear characteristics. The kit comes with a high clamp pressure plate, segmented chatter-free pure Kevlar clutch disc with a high torque sprung hub and disc assembly, throwout bearing, pilot bearing and install tool.Please review the details section below to verify this clutch kit will fit your application. SPEC Stage 2 Clutch Kit: Features segmented or full faced pure Kevlar disc with steel backing. This lining features excellent drivability like the stage 1, but offers slightly longer life and higher torque capacity.
The hub is double sprung with spring cover relieves for flexibility and heat treated components for strength and durability. Types of Driving: Street, Drag, Pulling, Autocross. This version reduces the weight of the pressure plate by about 40%. This will increase rwhp by significantly decreasing the rotating mass of your driveline, allowing power to transfer to the wheels much more efficiently.
The aluminum flywheel also decreases rotating mass, adding up to an additional 10 rwhp! Clutch Install Info Unless using a new flywheel provided by SPEC, the existing unit must be resurfaced prior to installation of the clutch product to ensure integrity of friction surface. Owner must also break in the new high performance clutch for a minimum of 500 miles, primarily city and/or stop-and-go driving, before full throttle engagement, drag launching or power shifting. Unless otherwise instructed by written notice from SPEC, follow manufacturers instructions when installing clutch and flywheel products.SPEC recommends that all bolts be inspected before re-installation, and any bolts that have been removed and re-torqued multiple times should be replaced. We do not lower invoice values since it is a violation of US and International custom laws. Let us work to resolve your problem so everyone is happy. Suite D7 Costa Mesa, CA 92627. And no repairs will be provided, nor labor charges covered by TREperformance Inc.